A-A-51506A
When assembled, the bottom of the box and lid shall extend to overlap the ends of the box. The closure flap on the lid shall close inside the box and extend to the bottom of the box when closed.
All dimensions of the form blank shall be accurately cut, scored and slotted so that the erect box panels fit closely without undue binding. The score lines shall show no continuous visual surface break splits completely through the inner or outer facing before and after folding.
The boxes shall be supplied with a set of instructions for each package of 100 flat form blanks. Shall be void of any marking on the outside facing of the box. Shall be clean and free of tears, cuts, holes, scuff marks, blisters, ply separation and splices. Edges shall be clean cut. The facings shall be smooth.
Workmanship. The boxes shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Package (PG). One hundred flat form blanks of one size only shall be clean, one package containing 100 boxes (flat form blanks) of one size only, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business