A-A-52033A
5.1 Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests).
6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order (see 7.1).
7. NOTES.
7.1 Ordering data. The contract or order should specify the following:
a. CID document number and revision.
b. If materials are other than that used in commercial manufacture (see 2.1). c. If standard container is as otherwise specified (see 2.2.1).
d. If the top paint color is other than olive drab (see 2.3.12.2).
e. Owner's CAGE identification, contract, serial and part numbers on each container
(see 2.3.13 and 2.3.13.1).
f. Product conformance provisions (see 5). g. Packaging requirements (see 6).
7.2 Source of documents.
7.2.1 ASTM A588, "Standard Specification for High-Strength, Low-Alloy Structural Steel, with 50 KSI (345 MPa) Minimum Yield Point to 4 in. (100 mm) Thick", (DoD adopted); ASTM A606, "Standard Specification for Steel, Sheet and Strip, High Strength, Low Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance",
(DoD adopted); and ASTM A847, "Standard Specification for Cold-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance" may be obtained from ASTM International, PO Box C700, 100 Barr Harbor Dr., West Conshohocken, PA 19428-2959 or website: www.astm.org
7.2.2 "International Convention for Safe Containers (CSC)" may be obtained from the Maryland Nautical Sales, Inc, 1400 E. Clement Street, Baltimore, MD 21230 or website: www.mdnautical.com
7.2.3 ISO 668, "Series 1 Freight Containers - Classification, Dimensions and Ratings"; ISO 1161, "Series 1 Freight Containers - Corner Fitting - Specification"; ISO 1496/1, "Containers, Series 1 Freight - Specification and Testing-Part 1: General Cargo Containers for General Purposes"; ISO 6346, "Freight Containers - Coding, Identification and Marking" may be obtained from the American National Standards Institute (ANSI), 11 West 42nd Street,
New York, NY 10036 or website: www.ansi.org
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business