A-A-669B
2.4 The lid shall be scored 101.6 mm (4 inches) from one end across the short dimension (width). The sides of the lid shall be notched the full depth at this score to form a hinge as illustrated in figure 1. One of the ends of the base blank shall be die cut as illustrated in figure 1. The cut shall be centered so that the wire handle illustrated in figure 1, when inserted, shall be equidistant between the two sides, and when lying flat against the box shall be approximately 6.35 mm (1/4 inch) above the bottom of the box.
2.5 The exterior of the box shall be lusterless green in color, in accordance with Federal Standard 595B,chip #34090.
2.6 Workmanship. The boxes shall be free from any defect that may affect their service ability, durability, or appearance.
3. REGULATORY REQUIREMENTS:
The contractor must certify that the product offered shall include a minimum of 30% post-consumer recovered material as defined in 40 CFR, Part 250. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
4. QUALITY ASSURANCE PROVISIONS:
The products provided shall meet the salient characteristics of this commercial item description, conform to the producer’s own drawings, specifications, standards and quality assurance practices and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance.
5. PACKAGING:
Packaging, Packing, Labeling, and Marking shall be as stipulated in the contract or purchase order.
6. NOTES:
6.1 Application for copies of documents referenced herein:
The issue date in effect on date of invitation for bids or request for proposal shall apply.
6.1.1 TAPPI T 411, and T 810 are available from Technical Association of the Pulp and Paper Industry, 15 Technology Parkway South, Norcross, GA 30092.
6.1.2 Federal Standard 595B and Code of Federal Regulations, Title 40, Part 250 are available through the Superintendent of documents, U.S. Government Printing Office, Washington DC 20402.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business