A-A-2835
Responsibility for Inspection - Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified, the contractor may utilize his own facilities or any commercial laboratory acceptable to the Government. The Government reserves the right to perform any of the inspections set forth herein, where such inspections are deemed necessary to assure that supplies and services conform to the prescribed requirements.
Each lot of boxes shall be inspected for conformance to the requirements herein. Inspection shall be in accordance with MIL-STD-105 using the sampling plans specified below.
Visual, dimensional, and sampling for end item testing - Inspection level S-2 with an Acceptable Quality level (AQL) of 2.5 percent defective. The sample unit shall be a single box.
5. Preparation for Delivery
Preservation, Packaging, Packing, Labeling and Marking shall be as specified in the contract or purchase order.
6. Notes
A. Part Identification Number
The following part identification numbering procedure is for government purposes and does not constitute a requirement for the contractor.
The below example describes a transporter double wall box in accordance with CID A-A-2835:
AA2835-TI
T = Style: S. Sleeve
T. Transporter
I = Type: I. Double Wall
II. Treble Wall
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business