NOTE 1. Black square is 6.35 mm (1/4) x 6.35 mm (1/4), and is centered above space between second and third dash, 3.81 cm (1-1/2) below the top of the box and 6.35 cm (2-1/2) from the left edge of the box.
NOTE 2. Dashes are 3.175 mm (1/8) above solid line and 1.27 cm (1/2) in length, uniformly spaced. Five dashes in upper block and four dashes in lower block as shown.
NOTE 3. The following two lines shall be printed in bold lettering at least 6.35 mm (1/4) high. Bottom of lettering for upper line shall be 2.54 cm (1) from the top box. Lower line is centered 3.81 cm (1-1/2) below the top of the box with the number sign (#) at the left margin and the word (OF) 5.08 cm (2) from the right side of the box.
AGENCY BOX NUMBER
# OF
NOTE 4. The following line shall be printed in bold lettering at least 6.35 mm (1/4) high. Bottom of lettering shall 2.54 cm (1) from top of box.
ACCESSION NUMBER
NOTE 5. The word FRONT shall be printed in bold lettering at least 1.27 cm (1/2) high in the middle of the panel and bottom of lettering 2.54 cm (1) above the edge of the box.
D. RECOVERED MATERIAL
D1. The contractor shall certify that the product supplied contains a minimum of 40% by weight post-consumer recovered materials as defined in 40 CFR Part 250. The contractor shall submit evidence in writing from the mills to ----- in the percent by weight of the post-consumer recovered material content.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business