A-A-670C
D2. The following statement shall be printed on the outside of each box on the bottom panel.
The fiberboard used in manufacturing this box contents a minimum of 40% by weight post consumer recovered material”
D3. The following logo shall also be printed on the outside of each box or the bottom panel. Black arrows shall be used.
Note. Size of statement and logo are at the supplier’s option
E. Workmanship. The completed box shall be clean, free of frayed or torn edges, improperly aligned panels, and improper score and slots. All markings shall be clear and legible. All dimensions if the box-maker’s blank shall be accurately cut, scored and slotted, allowing easy set-up and ensuring that the assembled box parts fit closely without undue binding. No flap shall project beyond an edge of the box by more than 3.175 mm (1/8”) when the box is closed. All metal fasteners shall be well clinched, flush or below the interior and exterior surfaces of the joined fiberboard. The box shall be free from any defect that may affect its appearance, performance, use or cause injury to the end user.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business