INCH-POUND
MIL-DTL-47l0E
26 January 2006
Superseding
MIL-C-4710D
29 June 1988
DETAIL SPECIFICATION
CASE SET, TRANSPORT AND STORAGE
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers case sets (consisting of two cases) for shipment and storage of
miscellaneous small parts.
2. APPLICABLE DOCUMENTS
2. 1 General. The documents listed in this section are specified in section 3, 4,or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government Documents.
2.1.1 Specifications, standards and handbooks. The following specifications, standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
QQ-S-698 Steel, Sheet and Strip, Low Carbon
TT-C-490 Chemical Conversion Coatings and Pretreatments for Ferrous
Surfaces (Base for Organic Coatings)
TT-W-572 Wood Preservative: Water-Repellent
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Philadelphia (DSCP), ATTN: DSCP-ITAA, 700 Robbins Avenue., Philadelphia, PA 19111-5096
or e-mail to dscpg&inspecomments@dla.mil. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 8115
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business