PPP-B-1672 Boxes, Shipping, Reusable With CushioningThis specification covers shipping boxes consisting of a fiberboard box with appropriate cushioning components for the intended use see 6.1.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32

PPP-B-1672E

Format:

Example:

REUSABLE

FAST PACK - (Enter proper pack code, see TABLE I)

(Enter proper pack size and shipping cube, see TABLE I.

(Enter proper NSN, see TABLE I)

REUSABLE

FAST PACK - XA2

8 x 8 x 12 CU 0.014

8115-00-192-1604

3.4.1.2 Type II packs. The following markings shall be in characters of a size not less than 1/4 inch (6 mm) high. The markings shall be placed within approximately the right one- third of the two narrow sides of the pack. The marking format shall be as follows:

Format:

REUSABLE - FAST PACK - (Enter proper pack code, see TABLE I) (Enter proper size and shipping cube, see TABLE I.

(Enter proper NSN, see TABLE I)

EXAMPLE:

REUSABLE - FAST PACK - XC1

6 x 5 x 2-1/2 CU 0.001

8115-00-787-2142

The slide shall be marked with the words "PUSH OPEN" and "ANTI STATIC" visually centered on each end. The words "PUSH OPEN" and "ANTI STATIC" shall be in 3/8 inch (10 mm) characters. The words "ANTI STATIC" shall be placed a 1/4 inch (6 mm) below the words "PUSH OPEN". There shall be a 2 inch (50 mm) space between the words "PUSH" and "OPEN" and the words "ANTI" and "STATIC" as shown below.

[2 inch (50 mm)]

PUSH OPEN

ANTI STATIC