An Integrated Publishing, Inc. Site

An Integrated Publishing Website

Boxes Cartons Crates - FSC 8115

A-A-1234 - Box, Shipping (Wood, Nail, And Lock-Corner With Full Cleated Ends And Butt Joints) (Box; Top-Bottom, Sides, Or Ends)

This description covers new nailed and lock-corner wood boxes with full cleated ends and butt joints, assembled, knocked-down, or box parts (top-bottom, sides, or ends) for use as overseas shipping containers.

A-A-1235 - Containers, Plastic, Molded (For Liquids, Pastes, And Powders)

A-A-1241 - Box, Shipping (Wood, Nail And Lock-Corner With Two Exterior End Cleats) (Top, Bottom, Side Or End)

A-A-1699 - Boxes, Shipping, Corrugated Fiberboard Weather Resistant, Wax-Resin Treated

A-A-1701 - Box, Shipping, Corrugated Fiberboard, High Compression Strength, Weather Resistant, Wax Resin Treated

A-A-1738 - Box, Small Parts (Plastic, Compartmented)

A-A-1834 - Box, Folding

This description covers folding boxes of corrugated fiberboard material that are curtain coated with paraffin wax and polyethylene plastic or other repellants to assure protection against liquids and grease. The boxes shall comply with the Federal Food, Drug, and Cosmetics Act and regulations promulgated thereunder.

A-A-2016 - Box, Folding

This description covers Post Office Money Order Forms Box, Fiberboard, Special Use, type I. Type I shall be one-piece, tuck-end style (OPTE), modified as showin in figure 1. The size shall be inside dimensions, in inches, as follows, with a tolerance of minus 0, plus 3/16 inch: Length 8-1/2 Width 2-1/4 Depth 3-1/4

A-A-2017 - Box, Fiberboard, Special Use (Post Office Money Order Forms)

This description covers Post Office Money Order Forms Box, Type II. Type II shall be one-piece, tuck-end style (OPTE), modified as shown in figure 1. The size shall be inside dimensions, in inches, as follows, with a tolerance of minus 0, plus 3/16 inch. Lenght 8-1/2 Width 4 Depth 3-1/4

A-A-2018 - Box, Fiberboard Special Use, Type Iii, Style A (Post Office Money Order Forms)

A-A-2019 - Box, Fiberboard, Special Use Type Iv, Style A (Post Office Money Order Forms)

A-A-2020 - Box, Fiberboard, Overpack For Single, Type Iv Box For Post Office Money Order Forms

A-A-2021 - Box, Fiberboard, Overpack For Two Type Iv Boxes For Post Office Money Order Forms

A-A-2022 - Box, Fiberboard, Overpack For Three Type Iv Boxes For Post Office Money Order Forms

A-A-2023 - Box, Fiberboard, Overpack For Five Type Iv Boxes For Post Office Money Order Forms

A-A-2835 - Boxes, Consolidation, Fiberboard

A-A-2876 - Boxes, Shipping, Corrugated Fiberboard, High Strength Weather Resistant, Double Wall

A-A-30063 - Box, Setup

A-A-51506 - Box, Folding (Spectacle Mailing)

This commercial item description covers three sizes of folding boxes suitable for mailing spectacles in their spectacle cases, supplied in the flat form.

A-A-52029 - Container, Cargo, Side Opening

A-A-52032 - Container, Cargo, End Opening

This commercial item description (CID) covers 20 foot (ft) (6.1 meters (m)), reusable, International Organization of Standardization (ISO) 668 lCC, end opening, cargo containers for the transportation, distribution, and storage of military supplies.

A-A-52033 - Container, Cargo, Open-Top, Half Height

This commercial item description (CID) covers a 20 foot (ft) (6.1 meter (m)), reusable, International Organization of Standardization (ISO) lCX, cargo, open-top, half height container for the transportation, distribution, and storage of military supplies.

A-A-52527 - Collapsible Flatrack For Mainline Pumps (Metric)

This CID covers a 6.0 meter platform-based freight container (herein called `collapsible flatrack┬┐) which is suitable for conveyance by road, rail, sea, and storage of military equipment.

A-A-54674 - Box, Pathological Specimen Shipping, Insulated

A-A-54793 - Boxes, Setup (Mailing, Dental)

This commercial item description covers paperboard setup boxes of the full telescoping design, for use in mailing dental products.

A-A-54836 - Box, Pathological Specimen, Shipping

A-A-669 - Box, Shelf, Stationary Storage

A-A-670 - Boxes, Corrugated Fiberboard, Records Retiring

A-A-686 - Box, Fiberboard, Special Use (Post Office Money Order Forms)

A-A-689 - Carton, Egg

A-A-866 - Box, Paperboard, Metal Edge (Telescoping)

This commercial item description covers the requirements for paperboard boxes with metal edge stays and telescoping tops.

FED-STD-172 - Box, Fiberboard Corrugated, Triple Wall

FED-STD-173 - Box, Folding, Paperboard

FED-STD-174 - Box, Fiber, Solid

FED-STD-193 - Box, Fiber, Corrugated, Single-Wall (Double-Faced)

FED-STD-224 - Closing, Sealing And Reinforcing Of Fiberboard Shipping Container, General Method For (S/S By Astm-D1974)

The purpose of this standard is to provide uniform general methods for closing, sealing and reinforcing of fiberboard shipping boxes to and by Government activities.

ISO1161 - Containers, Series 1 Freight - Corner Fittings - Specification

ISO1496-1 - Containers, Series 1 Freight - Specification And Testing - Part 1: General Cargo Containers For General Purposes

ISO1496-2 - Containers, Series 1 Freight - Specification And Testing - Part 2: Thermal Containers

ISO1496-3 - Containers, Series 1 Freight - Specification And Testing - Part 3: Tank Containers For Liquids, Gases And Pressurized Dry Bulk

ISO668 - Containers, Series 1 Freight, Classification, Dimensions And Ratings

JAN-P-103 - Packaging And Packing For Overseas Shipment-Boxes, Wood Cleated, Solid Fiberboard (Use Ppp-B-591)

JAN-P-105 - Packaging And Packing For Overseas Shipment Boxes, Wood, Cleated, Plywood (S/S By Ppp-B-601)

JAN-P-108 - Packaging And Packing For Overseas Shipment---Boxes, Fiberboard (V-Board And W-Board), Exterior And Interior (Use Ppp-B-636)

JAN-P-120 - Packaging And Packing For Overseas Shipment-Cartons, Folding, Paperboard (S/S By Ppp-B-566)

JAN-P-133 - Packaging And Packing For Overseas Shipment - Boxes, Set-Up, Paperboard (S/S By Ppp-B-676)

LLL-B-631 - Boxes; Fiber Corrugated (For Domestic Shipment) (S/S By Ppp-B-636)

LLL-B-636 - Boxes, Fiber, Solid, (For Domestic Shipment) (S/S By Ppp-B-636)

MIL-B-0010377 - Box, Wood, Cleated, Veneer, Paper Overlaid

MIL-B-10377 - Box, Wood, Cleated, Veneer, Paper Overlaid

MIL-B-107 - Box, Wood, Wirewound (Overseas Type) (Use Ppp-B-585)

MIL-B-11496 - Breadbox, Delivery, Plastic

MIL-B-11886 - Box, Metal, Shipping, Reusable, Transporter, Steel, Maximum Load 9.000 Pounds

This specification covers noncollapsible, reusable, steel shipping boxes of 9,000 pound maximum load capacity.

MIL-B-138 - Boxes, Wood, Fiberboard-Lined For Overseas Shipment (For Weight Of Contents Not Exceeding 500 Pounds)

MIL-B-13932 - Box, Plywood, Metal-Bonded, General Specification For

MIL-B-14394 - Box, Metal, Shipping, Aluminum, For Cas Building Parts

MIL-B-15906 - Box, Self Locking,And Sleeve, Box (For Shipping Eam Cards)

MIL-B-16152 - Box, Folding (First Aid Packages)

MIL-B-17757 - Boxes, Shipping, Fiberboard (Modular Sizes)

This specification covers fiberboard boxes and liners of four modular sizes.

MIL-B-18154 - Box, Folding (For Ice Cream)

MIL-B-19108 - Box, Fireboard, Shelf

MIL-B-19109 - Box, Metal, Shelf

MIL-B-21560 - Box, Metal, Shipping, Reusable, Transporter, Steel, Type 1, Capacity 135 Cubic Feet, Maximum Load 9,000 Lbs (Use Mil-B-11886)

MIL-B-21825 - Box, Plywood, Demountable (Use Mil-B-26241)

MIL-B-21827 - Box, Consolidation, (Use Mil-B-43666)

MIL-B-233 - Boxes Supply Support Items, Stowage And Storage

This specification covers the design, fabrication, testing, packaging, and use of special purpose boxes for the protection and stowage or storage of supply support items for mechanical, electrical and electronic systems and equipments.

MIL-B-25114 - Box Sampling, Insulated, Type Mj-1

MIL-B-25305 - Box, Metal Or Nonmetal Shipping (Use Mil-C-4150 Or Mil-C-5584)

MIL-B-25447 - Box, Metal, Lightweight, Collapsible, Pallet Style

MIL-B-26063 - Box, Wood, Exterior, Cleated Plywood, Human Remains Transfer Case

MIL-B-26195 - Boxes, Wood-Cleated, Skidded, Load-Bearing Base (S/S By Astm D6256/D6256M)

This specification covers the requirements for new wood boxes, wood-cleated with skidded load-bearing bases.

MIL-B-26241 - Box, Demountable, Assembled With Fasteners Other Than Nails And Screws

MIL-B-2930 - Boxes, Shipping, Periscope

MIL-B-36408 - Box, Pathological Specimen Shipping, Insulated, Plastic (S/S By A-A-54674)

This specification covers one type of plastic insulated box, suitable for storage and shipment of frozen or refrigerated medical specimens and biologicals.

MIL-B-36931 - Box, Folding, Spectacle, Mailing (S/S By A-A-51506)

This specification covers two sizes of folding, fiberboard boxes suitable for mailing spectacles in their spectacle cases, supplied in the flat form.

MIL-B-36970 - Box, Blood Products Shipping

This specification covers one type of blood shipping container suitable for transporting refrigerated whole human blood to military blood processing laboratories.

MIL-B-37016 - Box, Plastic, Insulated, Meat And Dairy Products, Laboratory Sample

This specification covers an insulated box, completed with a non-attached cover, for use by Veterinary Corps food inspection personnel, to provide sufficient insulation in the shipment of samples of perishable food products in a frozen state, from the point of collection to military laboratories, for analysis.

MIL-B-37173 - Box, Setup, Mailing, Dental (S/S By A-A-54793)

MIL-B-37749 - Box, Pathological Specimen, Shipping (S/S By A-A-54836)

This specification covers a reuseable controlled temperature shipping container sufficiently durable for use in air and parcel post shipment of anatomical specimen or other items requiring closely controlled temperatures.

MIL-B-38721 - Boxes, Consolidation, Fiberboard And Polyolefin

This specification covers requirements for weather-resistant, high stacking strength, double-wall, and triple-wall corrugated fiberboard, and polyolefin boxes of special design and characteristics.

MIL-B-3889 - Box, Plastic, Compartmented, Small Parts (S/S By A-A-1738)

This specification covers the requirements for a transparent plastic box containing siz compartments and provided with a hinged cover.

MIL-B-40642 - Box, Fiberboard, Corrugated, Triple Wall, 1,000 Pound Capacity (Mil-B-43666)

MIL-B-4229 - Boxes, Paperboard, Metal-Stayed (Use Ppp-B-665)

MIL-B-43014 - Boxes, Water Resistant Paperboard, Folding, Set Up And Metal Stayed (S/S By Ppp-B-566, Ppp-B-665, Ppp-B-676)

MIL-B-43022 - Box And Liner For Liquids

MIL-B-43096 - Box, Pallet Type, Material Handling, Wood, Wirebound (S/S By Ppp-B-587)

MIL-B-43273 - Box, Fiberboard, For Packaging, And Packing Personnel Parachutes And Canopy Assemblies

This specification covers a two piece fiberboard box and liner of one type and size for packing of personnel parachutes and canopy assemblies.

MIL-B-43291 - Box, Fiberboard, Corrugated, Double-Wall, Weather Resistant (Use Ppp-B-636)

MIL-B-43645 - Box, Fiberboard, Leaflet Disseminator

MIL-B-43666 - Boxes, Shipping, Consolidation

This document covers modular size weather-resistant wood cleating plywood, wirebound plywood, and fiberboard shipping boxes provided with pallet bases, as applicable.

MIL-B-43692 - Boxes, Fiberboard, One-Piece Folder, Special Purpose

MIL-B-52508 - Box, Metal, Shipping: Reusable, Transporter, Controlled Humidity, Steel, 270-Cubic-Foot Capacity, 9,000 Pound Maximum Load

This specification covers a noncollapsible, reusable, steel shipping container of 9,000 pound maximum load capacity with provisions for humidity control.

MIL-C-10301 - Containers, Shipping, Reusable, (Boxes, Crates) For Transmission Or Transfer Assemblies Of Tank And Automotive Vehicles, And Driving Axle Assemblies Of Automotive Vehicles (S/S By Mil-Prf-11264)

MIL-C-10302 - Containers, Shipping, Reusable (Crates), For Driving Axle Assemblies Of Automotive Vehicles (S/S By Mil-Prf-11264)

MIL-C-104 - Crates, Wood: Lumber And Plywood Sheathed, Nailed, And Bolted (S/S By Astm-D7478/D7478M)

This specification covers requirements for two types and two classes of sheathed crates each of which may have two styles of bases. The crates are designed for net leads not exceeding 30,000 pound (lb) and to withstand the most severe overseas shipping and storage conditions.

MIL-C-11020 - Chests And Cases, Metal, General Specification For

MIL-C-11056 - Chest, Metal

MIL-C-11133 - Crates, Shipping, Wood, Open, Wirebound

This specification and appendix herein cover open, wirebound wooden shipping crates of slatted construction for net weight not exceeding 1,000 pounds.

MIL-C-11456 - Crates, Wood, Nailed, Unsheathed, Domestic Shipment, 1500 Pounds Maximum Load (Use Federal Specification Ppp-C-650 Crates, Wood, Open And Covered)

MIL-C-12148 - Case, Shipping, Canine

MIL-C-12804 - Container, Shipping, Fiber Tube, Spirally Wound, Telescope Type (S/S By Mil-C-3955)

MIL-C-132 - Crate, Wood, Open, Maximum Capacity 2,500 Pounds (S/S By Ppp-C-650)

Deg. Flush Head 160,000 Psi Uts

NAS2813THRUNAS2830 - Bolt, Shear, Hexagon Head, 180 Ksi

NAS2832THRUNAS2840 - Bolt, 100 Deg. Flat Head, Offset Cruciform And Slotted Dovetail, 180 Ksi

NAS2842THRUNAS2850 - Bolt, Brazier Head, Offset Cruciform And Slotted Dovetail, 180 Ksi

NAS2852THRUNAS2860 - Bolt, 100 Deg Crown Reduced Head, Torq Set (R) & Hi Torque, (R) 108 Ksi Shear

NAS464 - Bolt Shear, Close Tolerance

NAS467 - Bolt - Hex Head, Brass, Electrical

NAS624THRUNAS644 - Bolt - Twelve Point External Wrenching

NAS6603THRUNAS6620 - Bolt, Hex Head, Close Tolerance, Alloy Steel, Long Thread, Self Locking & Non Locking

NAS663THRUNAS668 - Bolt, 100 Degree Flush Tension Head (Hi-Torque) Recess, Long Thread Titanium Alloy

NAS6703THRUNAS6720 - Bolt, Hex Head, Close Tolerance, A286 Cres, Long Threads, Self Locking & Non Locking

NAS7103THRUNAS7116 - Bolt, 100 Deg Head, Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking And Nonlocking

NAS7203THRUNAS7216 - Bolt, 100 Deg Head, Phillips Recess, Close Tolerance, A286 Cres, Long Thread, Self-Locking & Nonlocking

MIL-C-22806 - Crate, Sheathed, Wood, Wirebound

MIL-C-24457 - Container, Shipping And Storage, Metal Reusable

This specification applies to the design, manufacture, testing, preparation for shipment, and shipment of reusable metal containers. These containers are intended to provide pressure tight and physical protection to non-irradiated, non-contaminated or non-fissile equipment for domestic shipment, overseas shipment, and storage.

MIL-C-24458 - Container, Metal Reusable, Shipping, Inspection And Refurbishment Of

This specification provides for inspection and refurbishment of metal reusable shipping containers. The specific containers for which this specification applies are a specified.

MIL-C-24465 - Containers, Shipping And Storage, Metal Reusable

This specification applies to the design, manufacture, testing, preparation for shipment, and shipment of reusable metal containers. The intended use of these containers is to provide vapor-proof and physical protection of unirrated, fissile material cargos under conditions of loading and unloading, shipment, and storage.

MIL-C-25010 - Container, Air And Surface Shipment Of Aircraft Components (2,000-Pound Maximum Load) (Use Mil-C-25731)

MIL-C-25139 - Crate, Wood, Open, Domestic (For Lightweight Bulky Airframe Items) Use Mil-C-25731

MIL-C-25731 - Crates, Wood, For Domestic And Overseas Shipment Of Airframe Components (2,000 Pound Maximum Net Load) (S/S By Mil-B-26195, Mil-C-104 And Mil-C-52950)

This specification covers the requirements for the construction of non-demountable, semi-demountable and fully demountable wood shipping crates for the packaging of aircraft control surfaces, lightweight bulky airframe items and other similar parts for air and surface domestic or overseas shipment.

MIL-C-28938 - Container, Metal, Shipping. Reusable, For Data Processing Equipment

MIL-C-3769 - Crates, Intermediate, Sheathed, Wood Nailed (For Maximum Net Loads Of 3000 Pounds) Use Mil-C-104A(

MIL-C-3774 - Crates, Wood: Open 12,000- And 16,000-Pound Capacity

This specification covers open crates.

MIL-C-38226 - Containers, Polyurethane, Rigid Or Flexible For Packaging Small Engines

MIL-C-3942 - Chest, Insulated, Whole Blood Shipping

MIL-C-4025 - Case, Shipping And Filing, Type L-1

MIL-C-4150 - Cases, Transit And Storage, Waterproof And Water-Vaporproof

This specification establishes the requirements for rigid, reusable, fire retardant, waterproof and water-vaporproof, rectangular cases manufactured from ferrous or non-ferrous metals or non-metallic matierals.

MIL-C-43369 - Container Assembly, Sample And Specimen Shipping, Box Type, For Meat And Dairy Product Samples

This specification covers a container assembly consisting of a paperboard mailing case and a metal can insert.

MIL-C-43391 - Container Assembly, Sample And Specimen Shipping, Box Type For Aviation Fuels And Lubricating Oils (S/S By Astm-D4306-88)

MIL-C-4349 - Crates, Wood 1,000-Pound Maximum, Load,Open, Domestic (Supersedes 100-73) (S/S By Ppp-C-650)

MIL-C-43621 - Container, Consolidation For Clothing And Related Items (S/S By Mil-B-43666)

MIL-C-44192 - Container, Shipping And Storage, Coat (Hanger Pack)

This specification covers dress coat shipping and storage containers, plastic garment bags, hanger bars, and hangers.

MIL-C-52661 - Containers, Cargo

MIL-C-52788 - Container, Refrigerated: 8 Feet X 8 Feet X 20 Feet, Insulated

This specification covers a 20 foot refrigerated container equipped with a 9,000 Btu per hour electric-motor-driven refrigeration unit powered by a self-contained 10 KW diesel-engine-driven tactical quiet generator set or external power source.

MIL-C-52950 - Crates, Wood, Open And Covered (S/S By Astm-D6039/D6039M)

MIL-C-5405 - Containers, Shipping, Fiber Tube, Spirally Wound (S/S By Mil-C-3955)

MIL-C-5406 - Crates, Wood, Open, Demountable 10,000 Lb. Maximum Load (Use Mil-C-3774)

MIL-C-6057 - Crates And Boxes, Aircraft And Airframe Component Parts, General Specification For (Use Mil-C-104)

MIL-C-62043 - Container, Standard, Plywood, (Cleated And Wirebound) Consolidation, For Shipments To Southeast Asia, Use Of (Use Mil-B-43666)

MIL-C-9282 - Container, Shipping, Metal, Reusable 5 Cu. Ft.-50 Cu. Ft (Use Mil-C-5584)

MIL-C-9437 - Crate, Wood, Open, Fuel Tank, External Assembled (S/S By Mil-C-52950)

MIL-DTL-4710 - Case Set, Transport And Storage

This specification covers case sets (consisting of two cases) for shipment and storage of miscellaneous small parts.

MIL-F-26068 - Food Container, Shipping, Insulated

MIL-HDBK-138 - Guide To Container Inspection For Commercial And Military Intermodal Containers

This handbook applies to the selection of any commercially owned or military owned intermodal container meeting the standards of the International Organization for Standardization (ISO) and certified under the provisions of the International Convention for Safe Containers (CSC). This handbook is specifically used by worldwide civilian and military personnel responsible for inspecting and selecting serviceable intermodal containers for shipment of Department of Defense (DOD) materiel.

MIL-K-23714 - Kits, Sampling, For Aviation Fuels, Reusable

This specification covers detailed requirements for a reusable fuel sampling kit and a fuel sampling replacement kit.

MIL-P-13126 - Packing Of Fiberboard Boxes, Knocked-Down, Flat (Use Ppp-P-10)

MIL-P-26342 - Pallet Box, Fiberboard, Expendable; For Air Shipment

MIL-P-83666 - Pallet Box, Wirebound

MIL-P-9902 - Panels, Full Cleated, Partially Cleated And Uncleated: Plywood, Veneer Paper-Overlaid And Solid Fiberboard For Box, Modular Systems

This specification covers material and fabrication requirements for two types, three classes, and three styles of reusable box panels, designed for modular container systems for overseas and domestic shipments of military equipment and supplies (see 6.1).

MIL-R-1859 - Reusable Shipping Containers For Engine Assemblies For Materials Handling Equipment And Special Purpose Vehicles.

MIL-STD-1335 - Box, Fiberboard, Corrugated, Modular, Intermodal

MIL-STD-1489 - Performance Testing Of Commercially Owned Household Goods Containers (S/S By Astm-D4169)

This document establishes a quantitative method for measuring the performance characteristics of carrier-owned household goods containers.

MIL-STD-731 - Quality Of Wood Members For Containers And Pallets (S/S By Astm-D6199)

This standard covers quality requirements for three classes of wood members employed in the construction of boxes, crates, pallets, and blocking and bracing within containers for domestic and overseas shipment.

MIL-STD-813 - Box, Wood, Demountable Reusable And Modular (Use Mil-B-26241)

MS18023 - ( Images) Box, Fiberboard, For Containers, Reusable, Aluminum, Hand Portable

MS24483 - Container-Locking Spindle

MS26503 - Container - Spark Plug, Aircraft

MS27213 - Skid, Shipping And Storage For Aircraft Components And Industrial Equipment, Class 1

MS27214 - Skid, Shipping And Storage For Aircraft Components And Industrial Equipment, Class 2

MS27219 - Box, Self Locking

MS90363 - Limited Reusable Packaging For Repairable Components

MS90407 - Box, Fiberboard, With Cushioning Insert, Limited Re-Use (For Items Over 10 Pounds To 100 Pounds Inclusive) (S/S By Ms90363)

NN-B-591 - Boxes, Fiberboard, Wood-Cleated (For Domestic Shipment) (S/S By Ppp-B-591)

NN-B-601 - Boxes, Wood-Cleated-Plywood, For Domestic Shipment (S/S By Ppp-B-601)

NN-B-621 - Boxes, Wood, Nailed And Lock-Corner (S/S By Ppp-B-621)

NN-B-631 - Boxes; Wood, Wirebound (For Domestic Shipment) (S/S By Ppp-B-585)

PPP-B-001011 - Box, Folding, Paperboard (For Food Packaging) (Use Ppp-B-566)

This specification covers two styles of folding boxes made of solid type bending grade paperboard for food packaging applications.

PPP-B-001365 - Box, Fiberboard, Corrugated, Double-Wall, Weather Resistant (S/S By Ppp-B-636E

PPP-B-001608 - Box, Corrugated Fiberboard, Weather-Resistant, Coated

PPP-B-001826 - Box, Shipping, Fiberboard (Highly Weather Resistant)

PPP-B-00562 - Box, Corrugated Fiberboard, High Compression Strength, Weather-Resistant, Double-Wall (S/S By Ppp-B-001364

PPP-B-00636 - ( Images) Boxes, Shipping, Fiberboard (S/S By Astm-D5118 And Astm-D1974)

This specification covers the fabrication of new fiberboard boxes, liners, and sleeves and requirements for assembly, use, water-proofing, fire retarding, closure, and reinforcing of the packed boxes as applicable.

PPP-B-1163 - ( Images) Box, Corrugated Fiberboard, High Compression Strength, Weather-Resistant, Wax-Resin Impregnated

PPP-B-1364 - ( Images) Boxes, Shipping, Corrugated Fiberboard, High Strength Weather Resistant, Double Wall (S/S By A-A-2876)

PPP-B-1606 - ( Images) Box, Fiberboard Special Use (Post Office Money Order Forms)

PPP-B-1672 - ( Images) Boxes, Shipping, Reusable With Cushioning

This specification covers shipping boxes consisting of a fiberboard box with appropriate cushioning components for the intended use (see 6.1).

PPP-B-2122 - ( Images) Box, Folding (Paperboard, For Archival Microfiche)

PPP-B-566 - ( Images) Boxes, Folding, Paperboard

PPP-B-575 - Box, Paper&Overlaid Veneer (Strap&Around Type)

PPP-B-576 - ( Images) Boxes, Wood-Cleated Panelboard (S/S By Astm-D6251)

PPP-B-580 - ( Images) Box, Household Goods (S/S By Astm-D4169)

PPP-B-585 - ( Images) Boxes, Wood, Wirebound

This specification covers the requirements for new wirebound wood boxes for domestic and overseas shipment of supplies and material.

PPP-B-587 - ( Images) Box, Wood, Wirebound Pallet Type (S/S By Astm-D6254)

PPP-B-591 - ( Images) Boxes, Shipping, Fiberboard, Wood-Cleated (S/S By Ppp-B-576)

PPP-B-601 - ( Images) Boxes, Wood, Cleated-Plywood (S/S By Astm-D6251)

PPP-B-621 - ( Images) Boxes, Wood, Nailed And Lock-Corner (S/S By Astm-D6880)

This specification and appendix thereto, covers new nailed and lock-corner wood boxes, assembled or knocked down, for use as domestic and overseas shipping containers.

PPP-B-636 - Boxes, Shipping, Fiberboard (S/S By Astm-D1974 And Astm-D5118)

This specification covers the fabrication of new fiberboard boxes, liners, and sleeves and requirements for assembly, use, waterproofing, closure, and reinforcing of the packed boxes.

PPP-B-638 - Box, Caps, Liners And Sleeves, Fiberboard, Knocked Down, Flat, Packing Of

This specification covers three levels of packing and the marking for shipment and storage of all styles, types, classes, varieties, grades, and sizes of fiberboard boxes, caps, liners, and sleeves, knocked down flat.

PPP-B-640 - ( Images) Boxes, Fiberboard, Corrugated, Triple Wall (S/S By Astm-D5168)

PPP-B-645 - Boxes, Folding, Fiberboard, Heavy Duty

PPP-B-650 - ( Images) Boxes, Corrugated Fiberboard, Special Purpose (Records Retiring)

PPP-B-655 - ( Images) Box, Fireboard, Six Or Eight Sides

This specification covers seven styles of corrugated fiberboard boxes with six or eight sides, for use in domestic shipment of supplies.

PPP-B-665 - ( Images) Boxes, Paperboard, Metal Edged And Components (S/S By A-A-669 And A-A-2807)

PPP-B-670 - Box, Setup, Mailing, Dental

PPP-B-676 - ( Images) Boxes, Setup

This specification covers the requirements for new paperboard setup boxes and for closure of filled boxes.

PPP-C-1266 - ( Images) Container, Thermal, Shipping, For Medical Material Requiring Controlled Temperature Ranges

This specification covers the design criteria and test procedures for eight sizes of containers suitable for the shipment and storage of medical material, specimens, and biologicals requiring continuous chill or freeze environment.

PPP-C-1266 - ( Images) Container, Thermal, Shipping, For Medical Material Requiring Controlled Temperature Ranges

PPP-C-1337 - Containers, Composite; (Steel Drum With Polyethylene Insert) (S/S By A-A-58020)

This specification covers two types of single-trip composite containers suitable for surface and air shipments of liquid chemical products compatible with polyethylene.

PPP-C-569 - Container, Plastic, Molded (For Liquids, Pastes And Powders). Overpacked (S/S By A-A-1235)

PPP-C-570 - Containers, Folding, Corrugated, Fiberboard (For Household Goods) (Use Ppp-B-655 Or Ppp-B-636 As Applicable)

PPP-C-580 - Crates, Wood, Household Goods

PPP-C-650 - Crate, Wood, Open And Covered

PPP-L-1607 - ( Images) Lagging, Wood, Wirebound

This specification covers requirements for two types of pre-fabricated lagging.